1, in the workpiece clamping correction, can only use the lowest speed state for correction, or manually trigger the chuck for correction, absolūti not in the high-speed state correction.

2,If you need to change the rotation direction of the spindle, you must not suddenly change the rotation direction, but stop the spindle first and then carry out.

3, the machine tool spacer should be flat, the width be the same as the width of the bottom surface of the tool, and the tool should not extend too long when installed.

4, in CNC precizitāte detaļas apstrāde if nepieciešams to bremzes vārpsta rotācija, must not use the method of reversing.